12/24 V XL LITHIUM BATTERY STARTER

Compact and powerful 12-24 V combination battery starter, weighing just 2.8 kg. Its 56,000 mAh LiPo batteries and peak power make it suitable for use on any type of 12 V vehicle, including earth-moving machinery, and on any 24 V industrial vehicle. The leads feature a large cross-section and can be connected to battery terminals up to 140 cm away. Ideal for carrying in a vehicle cab and for use in emergency vehicles. It is equipped with a convenient 12 V power socket that can also be used as a memory saver, a USB QC quick-charge socket and a powerful LED light to enable operation in any situation.

Voltage: 12/24 V
Battery: LiPo
Battery capacity: 56,000 mAh (207.2 Wh)
Outputs: Quick charge (5 V - 3 A; 9 V - 2 A; 12 V - 1.5 A); 12 V - 10 A
Input: 29 V - 2 A
Charging time: 4 hours
Starting current: 12 V 1,500 A; 24 V 700 A
Inrush current: 12 V 4,500 A; 24 V 2,100 A
Max. distance to starting terminals: 140 cm
Leads: Integrated, with safety system and boost function
Operating temperature: -40 °C / 60 °C

Instructions:

1. Vehicle battery voltage < 9.0 V
The 12 V indicator light flashes - the system indicates that the vehicle's operating voltage is 12 V but the battery is too low to allow starting. Press the 12 V button for three seconds to activate the jump starter and start the vehicle within the next thirty seconds.
2. Battery voltage between 9.10 V and 15.0 V
The 12 V indicator light is illuminated green - the system indicates that the vehicle's operating voltage is 12 V and is ready to start. CAUTION: If you are certain that the vehicle's voltage is 24 V, press the 24 V button for three seconds to change the voltage to the jump starter and start the vehicle. CAUTION: If this operation is carried out incorrectly on a vehicle with a 12 V system, it could cause serious damage to the vehicle's CPUs and could cause the batteries to produce hydrogen: EXPLOSION HAZARD.
3. Battery voltage > 15.0 V
The 24 V indicator light is illuminated green - the system indicates that the vehicle's operating voltage is 24 V and is ready to start. Start the vehicle within 30 seconds.

On vehicles without a battery or with a very low battery, the voltage indicator lights may not light up.
In this case, the polarity sensor will not indicate any polarity errors, so proceed with caution:
1. Make sure that the connection polarities are correct.
2. Manually select the voltage by pressing the 12 V or 24 V button for three seconds.
3. Jump start the vehicle and then quickly disconnect the clamps from the battery.

Advice:

Set contents:
Main unit with jump leads
230 V charger