sebS drilling screw, countersunk milling head, similar to DIN 7504-P, zinc plated
sebS countersunk milling head screw sim. to DIN 7504-P yell-galv. TX 30 5.5 x 45
The self-drilling screw with up to 50 % time savings when fastening wood to metal substructures
Register now and access more than 125,000 products
The self-drilling screw with up to 50 % time savings when fastening wood to metal substructures
Wing-type drilling screw, zinc-plated steel with self-tapping screw thread countersunk milling head, for processing hard and soft wood
Field of Application:
Securing wood to steel substructures.
Please note: Only use in areas protected from the weather.
Advice:
The recommendation for the maximum wood thickness was calculated with reference to the maximum attachment thickness of the substructure.
Wing-seBs must be appropriately tested for usability for each application case.
Drilling screws must be processed with a suitable drill/driver (e.g. cordless drill/driver)
The use of impact drivers is not permitted
Drilling screws must be fixed at right angles to the component surface
Advantages:
up to 50 % time savings when fastening wood to metal substructures
Datasheets(X)
![]() | |
Diameter (d) | 5.5 mm |
Length (l) | 45 mm |
Min./max. material thickness | 2.5-5.25 mm |
Max. material thickness for wood | 25 mm |
Head diameter (dk) | 10.8 mm |
Head height (k) | 3.4 mm |
Drill tip length (lp) | 11.4 mm |
Internal drive | TX30 |
Min. material thickness | 2.5 mm |
Max. material thickness | 5.25 mm |
Material | Steel |
Surface | Zinc plated yellow |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!