sebS drilling screw, countersunk milling head, similar to DIN 7504-P, zinc plated
sebS countersunk milling head screw sim. to DIN 7504-P yell-galv. TX 25 4.8 x 38
The self-drilling screw with up to 50 % time savings when fastening wood to metal substructures
Register now and access more than 125,000 products
The self-drilling screw with up to 50 % time savings when fastening wood to metal substructures
Wing-type drilling screw, zinc-plated steel with self-tapping screw thread countersunk milling head, for processing hard and soft wood
Field of Application:
Securing wood to steel substructures.
Please note: Only use in areas protected from the weather.
Advantages:
up to 50 % time savings when fastening wood to metal substructures
Advice:
The recommendation for the maximum wood thickness was calculated with reference to the maximum attachment thickness of the substructure.
Wing-seBs must be appropriately tested for usability prior to each application case.
Drilling screws must be processed with a suitable drill/driver (e.g. cordless drill/driver).
The use of impact screwdrivers is not permitted.
Drilling screws must be attached perpendicular to the surface of the component.
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
Diameter (d) | 4.8 mm |
Length (l) | 38 mm |
Min./max. material thickness | 2.0-4.4 mm |
Max. material thickness for wood | 23 mm |
Head diameter (dk) | 9.5 mm |
Head height (k) | 3.0 mm |
Drill tip length (lp) | 8.4 mm |
Internal drive | TX25 |
Min. material thickness | 2.0 mm |
Max. material thickness | 4.4 mm |
Material | Steel |
Surface | Zinc plated yellow |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!