dimos anchor UNI-RT distance mounting system, A4/zinc-plated and A4/A4
Spaced mounting system dimos UNI-RT A4/zinc-plated 8.8 16x250 anchor
The universal, rain-proof solution for spaced installations with thermal separation in External Thermal Insulation Composite Systems (ETICS)
Art.-no. 0911216250
EAN 4066115009563
Register now and access more than 125,000 products
The universal, rain-proof solution for spaced installations with thermal separation in External Thermal Insulation Composite Systems (ETICS)
The anchor rod with the fibreglass-reinforced thermal separation module extends self-tapping through the plaster into the insulation material and ensures safe, fast installation, which is also approved for use with RECA chemical injection mortars. The EPDM seal seals the drill hole cleanly and makes it rain-proof (see PfB test report).
Application area:
Installation of e.g. awnings, small canopies, French balconies, air-conditioning units, heat pumps, satellite dishes on thermally insulated façades in perforated and solid brick and concrete.
Advantages:
- Approved for perforated and solid brick and concrete
- Suitable for use with medium to heavy loads
- High degree of flexibility
- Easy, quick and safe installation
- Effective thermal separation
- Pre-assembled and weather-resistant EPDM seal
- External parts made of corrosion-resistant materials such as polyamide and A4 stainless steel
- Adjustable
Content remark:
Ready to use
Advice:
only in combination with RECA VMU plus, VMU plus polar and VM-EA chemical injection mortars!
Datasheets(X)
 | |
Type description | dimos anchor UNI-RT 16 A4/zp. |
Min./max. insulation thickness | 60-300 mm |
Length | 392 mm |
Outer diameter sealing ring | 42 mm |
Outer diameter thermal separation module | 30 mm |
Diameter connection thread | 12 mm |
Material of threaded rod | Steel |
Core diameter thermal separation module | 26 mm |
Length thermal separation module | 60 mm |
Material of sealing ring | Ethylene propylene diene terpolymer rubber EPDM |
Material of connection thread | Stainless steel A4 |
Required injection mortar | VMU plus 300, VMU plus 330, VMU plus 420, VM-EA 300, VM-EA 330, VM-EA 420, VMU plus polar 300, VMU plus polar 330, VMU plus polar 420 |
Surface of threaded rod | Zinc plated |
Material of thermal separation module | Polyamide PA 6 with glass fibers |
Connection thread | M12 |
Nominal drill-bit diameter in masonry/concrete (d 0) | 18 mm |
Nominal drill-bit diameter in perforated brick (d 0) | 20 mm |
Through-hole in the component to be connected (d f) | 13 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
