diadrill 1 1/4 inch dry diamond core drill bit, usable length 400 mm
diadrill diamond core drill, dry, 1 1/4", usable length 400 mm, 92 mm
Register now and access more than 125,000 products
Can be used without water cooling to create wall openings for chimney connections, ventilation shafts, extractor hoods, waste water pipes etc. in masonry, sand-lime brick (up to a max. density of 2.0); not for use in concrete! 1 1/4 inch mounting thread
Application area:
For direct mounting in hand-held diamond drills or diamond drill presses with 1 1/4 inch mounting thread. Can also be used on other machines with the relevant adapters. The use of a dust extraction device is highly recommended as the extraction and associated cooling of the core drill bit significantly extend the service life!
Advice:
When using on hand-held machines, the hole is tapped with the appropriate centre cross (see accessories).
Datasheets(X)
Diameter | 92 mm |
Length | 450 mm |
Effective length | 400 mm |
Segment length x segment thickness x segment height | 20 x 3.5 x 10 mm |
Effective diamond section | 8.5 mm |
Number of segments | 6 |
Connection thread | 1 1/4 inch |
Material to be processed | Masonry |
Segment height | 10 mm |
Segment length | 20 mm |
Segment thickness | 3.5 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
