Zirconium flap wheel with shank
Flap wheel with shaft, zirconia abrasive fleece, grain 180, 80 x 50 x 6 mm
Register now and access more than 125,000 products
Finish on stainless steel, steel and non-ferrous base metals.
For removing oxides and discolouration.
Produces a highly uniform surface with a high sheen.
Advantages:
This robust zirconium fleece enables:
- Cool and aggressive sanding
- Long service life
- No clogging
Advice:
Please note: Pay attention to the direction of rotation! Tools are only suitable for clockwise rotation!
General working instructions:
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain.
Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing.
If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!