XTREME GRIP CHEMICAL ANCHOR

Two-component chemical anchor based on vinyl ester resin for heavy-duty structural fastenings

For heavy load structural attachments on cracked and non-cracked concrete, solid and perforated brick masonry and timber, also in seismic areas.
CE marked and European Technical Assessment (ETA) certified for anchorages in cracked and non-cracked concrete
Certified for work in seismic category C1 and C2
Also suitable for attachment to perforated parts, solid brick and timber
Rapid commissioning
Can be used on wet surfaces or surfaces with saturated holes
Surface temperatures during installation from -10°C to +40°C
Ensures fire-resistant performance, up to a maximum of R240
Possible to submerge the anchoring hole up to a depth of 1 metre
Easily penetrates into pores and hollow areas
Secure fixing without expansion and without tension in the surface
Pack of 6 pcs

Application area:

Metal frames and constructions in general
Ventilated façades
Emergency stairwells
Canopies and cantilever joints in general
Elevators, lifts and lifting fixtures
Life lines
Watertight barriers
Walkways
Consolidations in seismic areas
Floor reinforcements
Shrinkage joint with post-installed reinforcement rods

Field of Application:

In conjunction with using threaded rods or rods with improved adherence, it can be used in a wide variety of different situations for securing heavy loads or where, due to the presence of critical temperatures (< 0°C or > 30°C) other types of anchoring devices cannot be used.

Advantages:

The absence of styrene allows for indoor use.
On all types of surfaces, solid or perforated, whether wet or saturated;
For heavy-duty structural attachments;
In situations subject to seismic regulation;
Very wide range of setting temperatures;
Fast commissioning times.

Advice:

CERTIFICATIONS:
Class A+ VOC emissions pursuant to French Decree no. 2011-321 and in accordance with ISO 16000/ EN16516.
Qualified with European Technical Assessment (ETA 19/0842, DoP no. 134/19 NB 1488) according to EAD 330499-01-0601 for applications in:
• Option 1: cracked concrete - threaded rods M10–M20
• Option 7: non-cracked concrete - threaded rods M8–M30
• Seismic category C1: threaded rods M12–M20
• Seismic category C2: threaded rods M12–M16
Qualified with European Technical Assessment (ETA 19/0841, DoP no. 135/19 NB 1488) according to EAD 330087-00-0601 and EAD 331522-00-0601 for applications in any seismic area.