Welcome to RECA Spain For trade customers only

VMZ-IG internally threaded sleeves

VMZ-IG female thread sleeves, galvanised steel, 125 M12 x 30/130

Art.-no. 0914412125
EAN 4029484495672

Prices for customers after login
VMZ-IG internally threaded sleeves

Art.-no. 0914412125

Prices for customers after login
Quantity
PU
x 10

Exclusively for trade customers

Register now and access more than 125,000 products

Field of Application:


For use in dry indoor areas

Advantages:


  • Anchor rod expansion cones can be optimally adjusted using various anchorage depths for high load-bearing capacities in cracked and non-cracked concrete

  • Low expansion pressure allows low spacing and edge distance

  • Can be used in wet and dry concrete from drill hole diameter ≥ 14 mm (VMZ-A ≥ M12, VMZ-IG ≥ M10), even in drill holes full of water

  • Application permissible above a surface temperature of -5°C

  • Drill hole is sealed as well as possible after curing

  • High temperature resistance (permanently up to +72°C, briefly up to +120°C)

  • Opened cartridges can be re-used if they are re-sealed with the end cap

  • Can also be used in concrete < C20/25 and in hard natural stone without construction permit

  • Flexible application using threaded rods, washers and nuts or bolts made from galvanised steel with a strength class 8.8 and upwards

  • Attractive look thanks to full selection of head types such as countersunk head, pan head, hexagon head, cylinder head etc.

  • Fixings can be removed from the flush-mounted anchor
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Type description

VMZ-IG 125M12

Outer diameter

16.5 mm

Thread type

Metric thread

Female-thread length

30 mm

Nominal drill-bit diameter injection system (d 0)

18 mm

Drill hole depth (h 1)

133 mm

Torque during anchoring (T inst)

25

Minimum component thickness (h min)

170 mm

Through-hole in the component to be connected (d f)

14 mm

Material

Steel

Surface

Zinc plated

Required injection mortar

VMZ 330

Anchor length (l)

130 mm

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
x-tron SDS-Plus hammer drill bit

SDS-plus x-tron hammer drill bit, 18 x 250/200

The robust all-rounder with an extremely long service life
x 1
2C tape measure

Tape measure, EC 2, nylon-coated tape, 5 m

x 1
Standard application gun for dual cartridges

Standard cartridge gun for chemical injection mortar

x 1
Mixer nozzle

Mixer nozzle, VM-X

x 10
Small one-handed blow-out pump, dia. 70 mm

VM Multi blow-out bulb, Ø 70 mm 143 ml

x 1
Cleaning brush made from stainless steel wire

Cleaning brush RB, stainless steel wire, in concrete and solid brick 14 M6

x 1
The packaging unit (EU) indicates the number of items in a box, which corresponds to the packaging of the product. Here you specify the desired quantity of UE.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information