VMU plus chemical injection mortar
VMU plus chemical injection mortar 300 ml, foil cartridge with mixer nozzle
The universal injection system for cracked and non-cracked concrete, solid and perforated brick masonry and retrofitted reinforcement attachment (does not apply to the 300-ml cartridge)
Register now and access more than 125,000 products
The universal injection system for cracked and non-cracked concrete, solid and perforated brick masonry and retrofitted reinforcement attachment (does not apply to the 300-ml cartridge)
The VMU plus injection system is a bonded anchor system, comprising the two-component,
styrene free composite mortar VMU plus and various system components that must be used depending on the building material and application.
Field of Application:
For anchoring heavy loads such as steel beams, steel supports, brackets, awnings,
façades, canopies etc. in cracked and non-cracked standard concrete with a strength class ≥ C20/25 and ≤ C50/60, masonry made of solid brick and perforated brick.
Advice:
The tubular film cartridge (0911 003 300) must be cut open before use. To do this, pull the foil on the thread outwards and cut using scissors.
Advantages:
- Just one chemical injection mortar for virtually all applications, ensuring greater flexibility,
- reduced stock and increased application reliability
- Approved for cracked (M 8 to M 30) and non-cracked concrete (M 8 to M 30)
- Approved for post-installed reinforcement attachments (Ø 8 to Ø 32)
- Approved for use in wet concrete and boreholes that are filled with water (M 8 to M 16)
- Approved for solid and perforated brick masonry
- Approved for conventional threaded rods with proven strength (acceptance test certificate 3.1)
- Substrate temperature during application: -10°C to +40°C (concrete)
- Ambient temperature once fully cured: -40°C to +120°C (in concrete)
- Variable anchoring depths for added flexibility
- Fire protection test
- Opened cartridges can continue to be used with a new mixer nozzle
- Styrene-free two-component vinyl ester-based mortar
- Approved for use during seismic activity in performance category C1 (M 8 to M 30)
- Products bearing the NSF logo have been tested and registered by the National Sanitary Foundation (NSF). NSF is the only international registration that guarantees that the product can be used in the food industry without posing health risks
Type description | VMU plus chemical injection mortar 300 |
Chemical basis | Vinylester, styrene free |
Content remark | Tubular film cartridge incl. mixer nozzle |
Shelf life from production | 12 Month |
Contents | 300 ml |
Number of pieces per covering box | 12 PCS |
Last viewed
SPRAYER GUN
BLUESCAR EP 2 - 600 g CARTRIDGE
Accessories for angle grinders and hand-held circular saws
SPARE JET PIPE 1700 mm FOR PROFESSIONAL WASH SET
Circlip for bore holes, DIN 472, plain
TRANSPARENT DISPENSER FOR C-FOLD PAPER TOWELS
diamop diamond grinding cup AERO for concrete and abrasive materials
SHUNT FOR UNI FUSE
