VM-A anchor rods, A4 stainless steel
Threaded rod, 3.1 VM-A DIN 976-1 A4-70, for composite mortar systems M16x1,000
Art.-no.
091180416
EAN 4029484500222
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Field of Application:
For use outdoors or in wet rooms if there are no particularly aggressive conditions present.
Advantages:
Only one threaded rod required for different clamping thicknesses as the rod can be adjusted as needed
Can also be used for large clamping thicknesses, for example those found in heat insulation
Threaded rods, length 1 m, for cutting
Includes an acceptance test certificate 3.1 EN 10204 in each pack (proof of strength)
Advice:
The use of standard threaded rods, washers and nuts is permissible when using the VMU injection system in masonry or in uncracked concrete if the following requirements are met:
- Material, dimensions and mechanical properties correspond to the specifications of the relevant approvals.
- Evidence of material and mechanical features of steel parts by acceptance test certificate 3.1 in line with EN 10204:2004; the certificates must be retained.
- The threaded rods must be marked with the required effective anchorage depth.
- Compliance with further requirements of the particular approval.
If using these threaded rods in other injection systems, the requirements of the respective approval must be fulfilled.
A4 stainless steel (specially coated hexagon nut)
Product information
Datasheets(X)
Type description | VM-A 16x1000 A4 |
Required injection mortar | VM-EA 300 |
Anchor diameter x anchor length (l) | 16 x 1000 mm |
Nominal drill-bit diameter (d 0) | 18 mm |
Material | Stainless steel A4 |
Construction product | Yes |
Anchor diameter | 16 mm |
Anchor length (l) | 1000 mm |
Thread diameter (metric thread) | 16 mm |
Thread length (metric thread) | 1000 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!