VM-A anchor rods, A4 stainless steel

Field of Application:

For use outdoors or in wet rooms if there are no particularly aggressive conditions present.

Advantages:

Only one threaded rod required for different clamping thicknesses as the rod can be adjusted as needed
Can also be used for large clamping thicknesses, for example those found in heat insulation
Threaded rods, length 1 m, for cutting
Includes an acceptance test certificate 3.1 EN 10204 in each pack (proof of strength)

Advice:

The use of standard threaded rods, washers and nuts is permissible when using the VMU injection system in masonry or in uncracked concrete if the following requirements are met:
- Material, dimensions and mechanical properties correspond to the specifications of the relevant approvals.
- Evidence of material and mechanical features of steel parts by acceptance test certificate 3.1 in line with EN 10204:2004; the certificates must be retained.
- The threaded rods must be marked with the required effective anchorage depth.
- Compliance with further requirements of the particular approval.

If using these threaded rods in other injection systems, the requirements of the respective approval must be fulfilled.

A4 stainless steel (specially coated hexagon nut)