Torque wrench with plug-in tool mount
RECA torque wrench 40–200 Nm, with interchangeable system 14x18 mm 470 mm
Register now and access more than 125,000 products
- Trigger accuracy: ±3 % tolerance from the set scale value
- High level of repetition accuracy and precision for at least 5000 load cycles
- For controlled anti-clockwise and clockwise tightening
- The actuation direction is changed by rotating the torque wrench
- Dual scale in N•m and lbf•ft graduations for precise adjustment
- Includes finely divisible N•m micrometre scale for fine and precise adjustment
- Large viewing window with magnifying function for optimum readability
- Clearly audible and perceptible torque trigger thanks to quick-release function
- Quick and reliable torque adjustment by turning the handle
- Secure locking feature on the handle
- Ergonomic and comfortable two-component handle with soft-grip zone
- Quick-lock plug connector for 9 x 12 or 14 x 18 plug-in tools
- Individual serial number for clear product identification
- Includes certificate in accordance with DIN EN ISO 6789 - based on national standards
Advice:
Release the load after every application by twisting the torque mechanism to the 0 position.
The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
Calibration certificates are valid for a maximum of 12 months from the time of commissioning. If the tool is used frequently,
this period should be reduced. A period should be specified after an assessment in accordance with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
Datasheets(X)
Mount square | 14 x 18 mm |
Length | 470 mm |
Weight | 900 g |
Min./max. torque measuring range | 40-200 Nm |
Scale value torque | 1 Nm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!