Toothed mounting rails, ZS type 41

recamo toothed mounting rails are available in two different profile sizes (41/21 and 41/41), each in three different lengths (2, 3 and 6 m).

Application area:

The toothed mounting rail system is the best and most secure installation method for the medium and higher load ranges. Ideal for pipe installation, as a load-bearing structure for ventilation ducts or as a support for wiring in electrical installation. Rails and brackets feature characteristic teeth inside the flanged section for secure attachment with lateral and vertical adjustment and positive-fit connection of all attached and suspended parts.

IMPORTANT: The rails are only suitable for indoor use!

Field of Application:

Attachment to ceilings and walls:
The toothed mounting rail anchoring was not factored into the calculation of the loads. The required screws and/or anchors must be suitable for the maximum permissible rail load.
Load:
If sliding nuts are used to install the rails (in suspension), the load must not exceed the admissible load for the sliding nuts! The through-hole method should therefore be used to install the rails in the event of high loads.
The use of securing clips (M10 0858 641 011, M12 0858 641 012) is recommended for increased safety.

Advice:

PLEASE NOTE: All PU values are in METRES!

Rails and double rails measuring six metres are sent separately as individual packed items. Please contact our internal sales team for information on applicable freight charges.
When delivering rails measuring six metres directly to a construction site, the enclosed form must be filled in with the details of the consignment.