Threaded bushings
Ensat thread insert, bore hole from 14.7 to 15.4 mm, M12
Register now and access more than 125,000 products
A self-tapping thread insert with female and male thread. Cutting slots ensure effective working. The threaded bushing means that torn-out threads can be repaired quickly.
Application area:
These drill hole diameters serve as a guide and apply to most materials. Depending on the strength of the material, the smaller or larger value is adopted (usually the mean value). In specific cases or with certain materials, the drill hole diameter is determined by testing. Minimum material thickness = length of bushing. For blind holes, the drill hole depth equates to the length of the bushing + 3 to 4 x pitch of the male thread. The drill holes must be countersunk. The edge distance of the bushing must not be less than approx. 0.3 x the outer diameter. Lubrication, e.g. with reca Bio Cut art. no. 0896 413 400, is recommended when screwing in.
Advantages:
- The same screw size can be reused.
- The thread is much more resilient.
- No damage caused by torn-out thread.
- The threaded bushing is not affected by cavity spots.
Datasheets(X)
Pitch | 1.5 mm |
Min./max. drill diameter | 14.7-15.4 mm |
Female thread | 12 mm |
Male thread | 16 mm |
Length | 22.0 mm |
Last viewed
HSS-Co twist drill bit DIN 338
INOX 1/4 inch TX bit
PRINTING LAYOUTS FOR PAIRS OF STANDARD 4 MM AND ANTI-SPRAY MUD FLAPS
Cubitron II high-grade steel vulcanised fibre disc
S 300 silicone acetate
Boxx 374 plastic system case
x-tron SDS-Plus hammer drill bit incl. trade pack
arecal Novaclean brake cleaner
RECA four-way socket wrench
arecal OEL CLEAN workshop cleaner