Threaded bushings
Ensat thread insert, bore hole from 8.7 to 9.4 mm, M6
Art.-no.
0660302060
EAN 4029484109760
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
A self-tapping thread insert with female and male thread. Cutting slots ensure effective working. The threaded bushing means that torn-out threads can be repaired quickly.
Application area:
These drill hole diameters serve as a guide and apply to most materials. Depending on the strength of the material, the smaller or larger value is adopted (usually the mean value). In specific cases or with certain materials, the drill hole diameter is determined by testing. Minimum material thickness = length of bushing. For blind holes, the drill hole depth equates to the length of the bushing + 3 to 4 x pitch of the male thread. The drill holes must be countersunk. The edge distance of the bushing must not be less than approx. 0.3 x the outer diameter. Lubrication, e.g. with reca Bio Cut art. no. 0896 413 400, is recommended when screwing in.
Advantages:
- The same screw size can be reused.
- The thread is much more resilient.
- No damage caused by torn-out thread.
- The threaded bushing is not affected by cavity spots.
Product information
Datasheets(X)
Last viewed
Rapid flat-wire staple type 140
Setting tool for cavity anchors, MZ 8
ultra EVO-S SDS-Max point chisel
1/4 inch PH recess bit
SCAR 1 INCH COMPOSITE IMPACT WRENCH WITH SHORT SHANK
Rockwool foil-laminated rock wool RS 800, 100 %/50 %
ultra through hole machine tap
White domestic toilet paper
MANUAL DIESEL DISPENSING GUN
REPLACEMENT GLASS REAR MIRROR FIAT DUCATO IVECO DAILY