Thread-rolling hexagon head screw, similar to DIN 7500-DE, zinc-plated
Self-tapping screw, hexagonal sim. DIN 7500-DE galvanised, AF 13 M8 x 16
Register now and access more than 125,000 products
Thread-rolling screws create their own "female thread" during installation - when screwing into ready-made holes - without creating any chips. This creates an optimal screw connection in steel, high-pressure die-cast metal, aluminium, brass and copper with minimal installation costs.
Advantages:
- No thread cutting
- No chips
- Low installation torque
- Groove with standard metric thread
Advice:
Guidelines for core hole diameter
In copper and copper alloy (E-CU F30 and CuZn F38); aluminium and aluminium alloys (Al 99.5 F13 and AlMn F10) and steel (St 12 and 37). In certain cases, ideal values can only be established in laboratory tests.
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Length (l) | 16.0 mm |
Head type | Hexagon head |
Head height (k) | 5.45 mm |
Head diameter (dk) | 16.9 mm |
Flange thickness (c) | 1.35 mm |
Drive type | Outer hexagon |
External drive | WS13 |
Width across corners (e) | 14.38 mm |
DIN | 7500-1 |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Nominal diameter | 8 |
Thread type x nominal diameter | M8 |
Last viewed
Rapid flat-wire staple type 140
STEEL GUN FOR GREASE SET
Hand wash paste
UNICON multi-purpose drill bit, round shaft, big pack
Drain pipe clamp M8
Remaining stock
AMBER 2 SCAR GREASE - 600 g CARTRIDGE
RECA ultra E-Slim VDE – slotted
sebS drilling screw, PH pan head, sim. to DIN 7504-N galv
RECA arecal Active Clean, active windscreen cleaner