TSM A4 stainless steel screw anchor with M8/M10 female thread and hexagon drive
Screw anchor with internal thread TSM LT 6x45 K IT M8/10 AF 13 A4
Drill - screw in - done
Register now and access more than 125,000 products
Drill - screw in - done
The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Advantages:
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the front of the anchor ensure minimal tightening torque
- No expansion effect, therefore minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Fastening can be fully removed again
- No torque control required
- Wide range of uses due to numerous versions
- Attractive appearance
 | |
Type description | TSM 6x45 K IG 8/10 LT A4 |
Anchor size | 6 |
Anchor length (l) | 45 mm |
Thread diameter | 7.5 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Surface | Plain |
Material | Stainless steel A4 |
Max. recommended power output for setting tool | 160 Nm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
