Spring toggle, zinc-plated steel
Toggle fixing, galv. steel, with wash basin mount, drill hole Ø 30 mm, M10 x 180
Art.-no.
0904510180
EAN 4029484147250
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Application area:
The following versions can be used for attaching the listed elements
Hook: lamps, lights, hanging baskets, ceiling decorations, hanging racks etc.
Hexagon nut: stand-off installations, racks, wardrobes, lamps, ventilation, ducts, washbasins, wall-mounted WCs, urinals, suspended pipework etc.
to
all materials with sufficient cavity depth - refer to table for minimum cavity depths.
Advantages:
- Locks automatically into the base material
- The threaded rods are adjustable, allowing gradients (piping) to be created using different lengths of thread engagement
- Immediate load-bearing capacity
Advice:
Minimum cavity depths and drill hole diameters must be observed. On the M10 version, a pre-mounted rubber plug fills the large drill hole.
Thread diameter | 10.0 mm |
Design | With washer, sealing washer and hexagon nut |
Anchor length (l) | 180 mm |
Thread length (metric thread) | 180.0 mm |
Nominal drill hole diameter | 30 mm |
Minimum cavity depth (h) | 140 mm |
Min. breaking force | 12 kN |
Surface | Zinc plated |
Material | Steel |
Product information
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
