Spring toggle, zinc-plated steel
Spring toggle, zinc-plated steel, with sleeve nut, drill hole dia 14 mm, M4 x 95
Art.-no.
0904204095
EAN 4029484147168
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Application area:
The following versions can be used for attaching the listed elements
Sleeve nut: metal, wooden and plastic profiles, curtain rails etc. Hook: lamps, lights, hanging baskets, ceiling decorations, hanging racks etc.
Hexagon nut: stand-off installations, racks, wardrobes, lamps, ventilation, ducts, washbasins, wall-mounted WCs, urinals, suspended pipework etc.
to
all materials with sufficient cavity depth - refer to table for minimum cavity depths.
Advantages:
- Spring toggles require smaller cavity depths than toggle fixings
- The anchors are automatically expanded by spring force in any position
- Immediate load-bearing capacity
Advice:
Minimum cavity depths and drill hole diameters must be observed. On the M10 version, a pre-mounted rubber plug fills the large drill hole.
Product information
Datasheets(X)
Thread diameter | 4.0 mm |
Design | With knurled nut |
Anchor length (l) | 95 mm |
Thread length (metric thread) | 95.0 mm |
Nominal drill hole diameter | 14 mm |
Minimum cavity depth (h) | 40 mm |
Min. breaking force | 2 kN |
Surface | Zinc plated |
Material | Steel |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
