Split pin, DIN 94, zinc plated
Split pin, DIN 94, galvanised, 3.2 x 20
Register now and access more than 125,000 products
Field of Application:
For securing castellated nuts in conjunction with bolts or threaded pins with split pin hole.
For securing split pin bolts.
Advice:
Do not use the split pins in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
 | |
Length of head (b) | 6.4 mm |
Thickness | 3.2 mm |
Length (l) | 20 mm |
Diameter (d1) | 3.2 mm |
DIN | 94 |
Width of head (c) | 5.8 mm |
Length between two pins of a splint (a) | 3.2 mm |
Material | Steel |
Surface | Zinc plated |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
CUT PROTECTION GLOVE CUT CATCH 4D
Impact socket wrench bit
Non-woven insulating sleeve with film
Dip-insulated mechanics' nippers (construction worker's pincers or end cutting nippers)
RAPID® 2000 chipboard screw with milling pocket head, yellow
HSS-Co twist drill bit DIN 1897
HSS-Co twist drill bit DIN 1897
arecal Insider interior cleaner
1/2 inch reversible ratchet, finely toothed
Flat drill bits for wood
