Rivet nuts, small countersunk head, zinc plated
Rivet nut, counters. head, sml, zinc-pl., bore Ø 7.0, clamp range 0.5–3.0 mm, M5
Register now and access more than 125,000 products
Blind rivet nuts combine two types of fastening:
1. Rivet connection of two materials when used as a rivet.
2. Creation of a screw thread without the need for thread cutting.
Advantages:
- Creation of a thread even in thin-walled materials where thread cutting is not possible
- Access from one side; inside does not have to be accessible
- Screw connection produces the same values as a thread cut in a solid material
Design:
With knurling
Advice:
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Suitable for screw | M5 |
Rivet diameter (d) | 6.9 mm |
Shaft length (l) | 11.5 mm |
Min./max. grip range | 0.5-3.0 mm |
Head diameter (dk) | 8.0 mm |
Head height (k) | 0.7 mm |
Drill diameter | 7.0 mm |
Tensile fracture load | 9090.0 N |
Shear-fracture load | 2190.0 N |
Material | Steel |
Design | With knurling |
Last viewed
HSS DIN 338 twist drill bit
6X1 safety glasses
RAPID® 2000 chipboard screw with milling pocket head, yellow
arecal Thermo 800 copper paste spray
REFILL PACK MD 388 15/07/03 APPENDIX 1 BASIC
EXTREME HSS-Co8 hole saw
ultra slotted screwdriver with striking cap
Spade chisel SDS-max
arecal Marker USD Premium marking spray
HSS DIN 338 twist drill bit