Rivet nuts, small countersunk head, zinc plated
Rivet nut, counters. head, sml, znc-pl., bore Ø 12.0, clmp range 0.8–3.5 mm, M10
Register now and access more than 125,000 products
Blind rivet nuts combine two types of fastening:
1. Rivet connection of two materials when used as a rivet.
2. Creation of a screw thread without the need for thread cutting.
Advantages:
- Creation of a thread even in thin-walled materials where thread cutting is not possible
- Access from one side; inside does not have to be accessible
- Screw connection produces the same values as a thread cut in a solid material
Design:
With knurling
Advice:
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Suitable for screw | M10 |
Rivet diameter (d) | 11.9 mm |
Shaft length (l) | 20.0 mm |
Min./max. grip range | 0.8-3.5 mm |
Head diameter (dk) | 13.5 mm |
Head height (k) | 0.9 mm |
Drill diameter | 12.0 mm |
Tensile fracture load | 31750.0 N |
Shear-fracture load | 4260.0 N |
Material | Steel |
Design | With knurling |
Last viewed
Double ended drill bit HSS
ultra TX screwdriver
arecal silicone spray
CONTOUR LIGHT BULB
x-tron ultra SDS-Max 4-cutter hammer drill bit
Mini DISC ceramic
1/4 inch ADAPTER SCARTOOLS
Zone 360 XL work lamp
Recaseal uni window sealing film, alternating VSK and SK strips
Hose clamps, A2 stainless steel, with worm thread