Rivet nuts, round pan head, zinc plated
Rivet nut, round pan head, zinc-plated, bore Ø7.0, clamping range 0.3–3.0 mm, M5
Register now and access more than 125,000 products
Blind rivet nuts combine two types of fastening:
1. Rivet connection of two materials when used as a rivet.
2. Creation of a screw thread without the need for thread cutting.
Advantages:
- Creation of a thread even in thin-walled materials where thread cutting is not possible
- Access from one side; inside does not have to be accessible
- Screw connection produces the same values as a thread cut in a solid material
Design:
With knurling
Advice:
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Suitable for screw | M5 |
Rivet diameter (d) | 6.9 mm |
Shaft length (l) | 12 mm |
Min./max. grip range | 0.3-3.0 mm |
Head diameter (dk) | 10 mm |
Head height (k) | 1.1 mm |
Drill diameter | 7 mm |
Tensile fracture load | 11070.0 N |
Shear-fracture load | 2760.0 N |
Material | Steel |
Design | With knurling |
Last viewed
HSS-Co twist drill bit DIN 1897
FOOTSTEP GRILLE UPPER RH-LH
PAPER ROLLS WITH SPONGE
HSS DIN 1897 twist drill bit
UNICON multi-purpose drill bit, round shaft, big pack
Countersunk head chipboard screw, zinc plated, Pozidriv
Basic fabric adhesive tape
ultra INOX HSS-Co twist drill bit DIN 338
LED WORK LIGHT 2500 LUMENS
Non-recoil soft-face hammer