RIOL CLAMPS
RIOL CLAMP 52-55 mm
Register now and access more than 125,000 products
Bolt hose clamp W1. Consists a tape with slotted ends which house two barrels. The bolt passes through one of the barrels via a through hole and engages with the other, threaded. Clamping is done by screwing the bolt going through the passing barrel.
Instructions:
Clamp designed for applications where the rigidity or stiffness of the tube requires a high tightening torque. Assembly and disassembly is carried out directly on the bolt with manual (fork or socket wrench or socket wrench) or pneumatic tools (electric screwdrivers).
Datasheets(X)
Width | 22 mm |
Thickness | 1.2 mm |
Screw length | 60 mm |
Screw diameter | 7 |
Pitch | 1 |
Max. turning range diameter | 55 mm |
Min. turning range diameter | 52 mm |
Number of pieces per packet | 10 |
Last viewed
POLYESTER LIFTING SLINGS EN 1492-1
arecal Starter starter spray
Penny washer, tolerance DIN 522-A, zinc plated
Hammer core drill bit ratio - adapter and accessories
SPRAY GUN FOR FAP/DPF PARTICULATE FILTER TREATMENT
mega-tron III hammer drill bit Max
DISC pipe machining
2-SHELF SHELVING SECTION FOR HARDWARE BOXES
Hammerset anchor E, steel, galvanised
Recaseal uni SK, with self-adhesive strips