RAPID® timber screw with washer head, yellow
RAPID timber screw, washer head, Yellwin 500+, partial thread, TX 40 8.0x80/50
Diameter 6.0 mm-10.0 mm
Register now and access more than 125,000 products
Diameter 6.0 mm-10.0 mm
Field of Application:
Over-rafter insulation, structural wood construction, element construction, timber panel construction, interior finishing. For all applications in which timber screws are used.
Advantages:
- European Technical Assessment (ETA-12/0373).
- Washer head for high head pull-through values
- HiLo thread for reduced screw-in times and high technical values
- Patented friction part for lower screw-in resistance and longer battery life for screw-in units
- Patented tip with ridged core for precise and immediate application and reduced splitting effect
- Premium surface Yellwin 500+. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Advice:
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Nominal diameter | 8 mm |
Length (l) | 80 mm |
Head type | Disc head |
Head diameter (s) | 20 mm |
Internal drive | TX40 |
Thread type | Wood screw thread |
Thread design | Partial thread |
End milling cutter | Yes |
Thread form | Hilo, double start |
Thread length (thread for woodwork) (b) | 50 mm |
Material | Steel |
Surface | Zinc plated thick-layer passivation |
Approval | ETA-12/0373 |
Last viewed
A6 and A8 2-in-1 roughing disc for steel and high-grade steel
arecal MFO H1 approved, food-grade lubricating oil
1 inch IMPACT SOCKET WRENCH INSERT SCARTOOLS
arecal paint sprays, nitro-combination paint
F1/s cutting disc for steel
Sanding sleeves
EXTREME HSS-Co8 hole saw
ultra screwdriver sets
INDICATOR LIGHT AND POSITION BULB BA7S 24V
F/s-Mop flap disc with depressed centre