RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20

RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20 - 1

RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20 - 2

RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20 - 3

RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20 - 4

RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20 - 5

RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20 - 6

RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20 - 7

RAPID® timber screw with countersunk head, yellow - RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20 - 8

RAPID® timber screw with countersunk head, yellow

Name: RAPID® timber screw with countersunk head, yellow
Brand: RECA Hispania
SKU: 0160145035

RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 20 4.5x35/20
Diameter 3.0 mm-10.0 mm

Art.-no. 0160145035

EAN 4029484928057

All versions

Specification

Diameter 3.0 mm-10.0 mm

Field of Application:

Universal use, interior finishing, construction of roofs, furniture and elements, structural wood construction, over-rafter insulation. Wherever chipboard screws and timber screws are used.

Advantages:

European Technical Assessment (ETA-12/0373). From diameter 4.0 mm

HiLo thread - reduced screw-in times and high technical values

Patented friction part for lower screw-in resistance and longer battery life for screw-in units

Patented tip with ridged core for precise and immediate application and reduced splitting effect

Milling pocket head provides fast, clean countersinking and prevents the wood from splitting.

Fewer bit changes - one drive size for dia. 3.5-5.0 mm (TX20)

Additional drive size for dia. 5 mm (TX 25 carpentry)

Premium surface Yellwin 500+. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)

Advice:

Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.

Technical information


Nominal diameter	4.5 mm
Length (l)	35 mm
Head type	Countersunk milling pocket head
Head diameter (s)	9 mm
Internal drive	TX20
Thread type	Wood screw thread
Thread design	Partial thread
End milling cutter	No
Thread form	Hilo, double start
Thread length (thread for woodwork) (b)	20 mm
Material	Steel
Surface	Zinc plated thick-layer passivation
Approval	ETA-12/0373