Polyurethane foam 750 ml

Single-component polyurethane foam with high expansion power for guns

Single-component polyurethane foam that hardens with moisture. Special installation and expanding foam for use in applicator guns, suitable for filling window and roller blind box joints and insulating gaps.

Application area:

• Instructions for use

The surfaces must have load-bearing capacity and must be clean and free from dust, grease and separator agents. Dampen dry surfaces with water (spray). The ideal working temperature is +20°C. Follow the instructions for using your gun. Before screwing the canister into the applicator gun, and after interruptions in the workflow, shake the canister well at least 30 times. When screwing it into the gun, do not tilt or thread it. Remove any recent foam spills immediately with universal PU cleaner. Dry foam can only be removed mechanically.

Advantages:

• Hardens more quickly


• Very strong bonds


• High acoustic and thermal insulation power


• Not suitable for PE, PP, silicone, PTFE


• Not UV resistant

Advice:

This information is only a recommendation based on our experience. Users must always conduct tests before using the products. Safety data sheet available at http://www.recanorm.de/de/dienstleistungen/datenblaetter/sicherheitsdatenblaetter-chemie.html