Plasterboard plug ZD
Plasterboard plug ZD, die-cast zinc
Special anchor for fixings in gypsum plasterboard/gypsum fibreboard panels
Register now and access more than 125,000 products
Special anchor for fixings in gypsum plasterboard/gypsum fibreboard panels
For quick and easy installation in gypsum plasterboard/gypsum fibreboard panels, without pre-drilling and without additional setting tool
Application area:
For mounting lightweight attachments, e.g. electrical installations, lighting, pictures, lightweight shelves etc. in gypsum plasterboard/gypsum fibreboard panels
Advantages:
Fast assembly - no need for a special setting tool and pre-drilling
Lathe centre ensures easy positioning and drilling into the panel
Innovative 1/4 inch drive enables setting of the plug with PZ bit, TX bit etc.
Power transmission via the 1/4 inch hexagon mounting of the bit
Plasterboard plug and the screw can be screwed in using the same bit
Component can be fixed with wood or chipboard screws
High-quality die-cast zinc
Mechanical interlock mounting
Advice:
Screw directly into plasterboard panel until flush with a low torque
Datasheets(X)
Type description | Die-cast zinc |
Required particle-board screw diameter | 4.5 mm |
Anchor length (l) | 39 mm |
Required wood screw diameter (d scr.wood) | 4 - 4.5 mm |
Recommended tensile load in plasterboard 12,5 mm | 0.1 kN |
Recommended tensile load in plasterboard 2 x 12,5 mm | 0.12 kN |
Max. temperature resistance | 80 °C |
Min. temperature resistance | -40 °C |
Material | Die-cast zinc |
Collar diameter | 14.5 mm |
Hole diameter in component (d Bau) | 6.5 mm |
