PVC adhesive
Special adhesive for rigid PVC piping according to standard UNE 53-174, DIN 16970, BS 4346 part 3.
Register now and access more than 125,000 products
Special adhesive for rigid PVC piping according to standard UNE 53-174, DIN 16970, BS 4346 part 3.
Adhesive especially suitable for rigid PVC pipe connections and fittings in systems with pressure in accordance with EN14814. Especially suitable for connecting piping systems and fittings that comply with standards UNE EN 1452 and UNE EN 1329.
Approved adhesive (CE mark) for thermoplastic piping systems for pressurised fluids up to PN 16, in installations for transporting/disposing/storing water not intended for human consumption. Suitable for use in drinking water pipes.
Based on a homopolymer resin of polyvinyl chloride (PVC) and stabilised tetrahydrofuran (THF).
Field of Application:
Water supply, irrigation, gas pipes, industrial piping facilities and drainage and storm pipes.
Advantages:
- High apparent viscosity and excellent fluidity.
- High rate of thixotropy, which prevents breakage during application.
- Acts as a true PVC chemical welder.
- Easy to apply, does not run or form drips inside glued tubes.
- Glued connections have resistance and ageing characteristics comparable to those of rigid PVC.
- Its initially moderate grip allows for small corrections during installation.
Advice:
- This information is solely a recommendation based on our experience. Users should always perform a test before using products.
- As this product is highly flammable, proper precautions must be taken and the product must be stored in non-smoking areas away from flames, sparks and heat sources.
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
