Nylon anchor RND in dispenser box
Nylon anchor RND 10 x 50 mm/dispenser box contains: 500 pcs, screw 6.0-8.0 mm
High holding power in solid construction materials
Register now and access more than 125,000 products
High holding power in solid construction materials
With its outstanding properties, the RND nylon anchor offers very high holding power in solid construction materials such as concrete and solid blocks. This is thanks to the high material content and the expansion body split into two sections. The flexible wall plug shaft adapts optimally to the drill hole and ensures easy installation. Several active anti-rotation locks prevent rotating during installation.
Application area:
For mounting pictures, letterboxes, curtain rails, towel rails, wall cupboards, cable conduits, lamps, metal brackets, racks, pipe clamps, skirting boards, wall racks etc.
in concrete and solid construction materials
Advantages:
Very high holding power in solid construction materials due to high material content
Up to 30 % higher holding power than other expansion anchors
Anti-rotation lock with four lateral braces - no rotating in the drill hole
Screw-in centring ensures the expansion function
Can be used with different screw diameters and screw types.
The dispenser boxes serve not only as packaging, but can also be used as storage containers
Advice:
The specified holding power refers to the use of wood screws with max. diameter.
The effective anchorage depth of the anchor must be maintained.
The drilling method and drill hole cleaning must be adjusted to the construction material.
The recommended loads only apply to installation in the material and not installation in joints.
Approved anchors must be used for safety-relevant mountings.
Datasheets(X)
Type description | RND 10 |
Anchor diameter x anchor length (l) | 10 x 50 mm |
Nominal drill-bit diameter (d 0) | 10 mm |
Drill hole depth (h 1) | 70 mm |
Embedding depth (h nom) | 50 mm |
Required wood screw diameter (d scr.wood) | 6 - 8 mm |
Anchor diameter | 10 mm |
Anchor length (l) | 50 mm |
Material | PA 6 - Polyamide |
Recommended tensile load in concrete C20/25 | 2.0 kN |
Recommended tensile load in solid brick | 0.8 kN |