Nylon anchor RND Quattro in dispenser box
RND Quattro nylon anchor 8 x 40 mm/dispenser box contains: 800 pieces
Increased holding power thanks to 4x expansion
Register now and access more than 125,000 products
Increased holding power thanks to 4x expansion
The RND Quattro is a versatile nylon anchor that achieves very high holding power in a wide range of base materials thanks to its 4x expansion. The anti-rotation locks prevent rotating in the drill hole. For additional flexibility, the elasticated wall plug collar allows for pre-positioned and in-place installation.
Application area:
For mounting pictures, letterboxes, curtain rails, towel rails, wall cupboards, cable conduits, lamps, metal brackets, racks, pipe clamps, skirting boards, wall racks etc.
in concrete, solid brick and perforated block
Advantages:
4x expansion for very high holding power in concrete and masonry.
Elasticated wall plug collar allows for pre-positioned and in-place installation.
Anti-rotation locks prevent rotating in the drill hole.
Can be used with different screw diameters and screw types.
Screw-in centring ensures the expansion function.
The dispenser boxes serve as packaging, but can also be used as storage containers.
Advice:
The specified holding power refers to the use of wood screws with max. diameter.
The effective anchorage depth of the anchor must be maintained.
The drilling method and drill hole cleaning must be adjusted to the construction material.
The recommended loads only apply to installation in the material and not installation in joints.
Approved anchors must be used for safety-relevant mountings.
Datasheets(X)
Type description | RND Quattro 8 |
Anchor diameter x anchor length (l) | 8.0 x 40 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Drill hole depth (h 1) | 55 mm |
Embedding depth (h nom) | 40 mm |
Required wood screw diameter (d scr.wood) | 4.5 - 6 mm |
Anchor diameter | 8 mm |
Anchor length (l) | 40 mm |
Material | PA - Polyamide |
Recommended tensile load in concrete C20/25 | 1.2 kN |
Recommended tensile load in solid brick | 0.9 kN |
Recommended tensile load in perforated brick | 0.4 kN |
Recommended tensile load in aerated concrete | 0.19 kN |