Nail anchor N-M/zn pl with M8/M10 step thread
N-M 6-25/58 M8/10 nail anchor with M8 and M10 step thread zn pl steel 6x58
Register now and access more than 125,000 products
Application area:
Multiple attachment of non-load-bearing systems with approval
- In cracked and non-cracked concrete
- E.g. lightweight ceiling cladding and suspended ceilings, pipes, wire hangers etc.
- For use in reinforced or non-reinforced normal weight concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12
May only be used in dry indoor room conditions.
Field of Application:
Suspended ceilings, pipes, cladding, cable trays
Advantages:
Quick and easy installation
- Less drilling required thanks to reduced effective anchorage depth of 25 mm
- Easy insertion: Simply hammer in - no torque required
- No special drills or setting tools required
In-place installation
Minimal spacing and edge distance
Elegant, attractive design
Torque-controlled expansion anchor - expands when subjected to load
Compatible with both M8 and M10 threaded rods thanks to step thread
Advice:
- Anchors in a redundant non-structural system in concrete: European Technical Approval ETA-11/0339
- Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): Technical report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-11/0339)
- Thread length M8 = 7 mm
- Thread length M10 = 10 mm
- Sleeve size = SW 13
 | |
Anchor diameter x anchor length (l) | 6 x 58 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Drill hole depth (h 0) | 35 mm |
Effective anchoring depth (h ef) | 25 mm |
Through-hole in the component to be connected (d f) | 7 mm |
Minimum component thickness (h min) | 80 mm |
Surface | Zinc plated |
Material | Steel |
Anchor diameter | 6 mm |
Anchor length (l) | 58 mm |
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
