NEMOBE CLAMPS
NEMOBE CLAMP CLAMPING 60-80mm
Register now and access more than 125,000 products
Spring-loaded spacer clip W2B. Elastic worm gear spacer clip with constant tension and clamping calibration device.
Combines the versatility of a screw clamp with the elasticity of spacer clips that usually have a very limited range of applications. SALT SPRAY RESISTANCE: 200 hours min.
The elasticity of the spring system constantly maintains the pressure effort of the strap on the sleeve despite the dilation and contraction movements of the latter, due to temperature variations.
The band consists of padded strap with rounded edges and strapping outwards. The part is designed to limit aggressiveness on the sleeves and to facilitate coupling with the screw.
MATERIAL:
- Ferritic stainless steel band
- 17% chromium
- NF EN 10088-2 / 10088-3
- S 300 screws
- F 13 T3 case
- Spring 50 HP 4
Advantages:
The Nemobe has been designed to ensure perfect tightness of connections exposed to temperatures between -40°C and +130°C and to eliminate further screwing operations after the first few cycles of use.
Instructions:
The double head screw (calibrated break fuse) ensures initial tightening safety: when tightening, the screw tip breaks as the recommended tightening torque is reached. This provides visual certainty that the spacer clip has been closed correctly and that the spring system is working with the correct operating tension. The second head allows the spacer clip to be reused
Advice:
Screw closure: ± 7 mm
Operating torque 3 Nm
Datasheets(X)
Last viewed
Conical countersink HSS with morse taper
HSS-Co twist drill bit DIN 1897
Hexagon nut DIN 934 strength class 8, zinc plated
Non-woven abrasive rolls
Centre drill bit for socket cutter mounts
Countersunk head chipboard screw, zinc plated, Pozidriv
Angle bracket recamo type 38/40 zinc-plated
Mini DISC ceramic
diaflex SPECIAL diamond cutting disc for tiles/stoneware 115-125 mm
DISC INOX hook-and-loop disc