Multi-function frame anchor MFR SB SSKS, A4
MFR SB SSKS multi-function frame anchor, c/sunk anchor, st. steel A4, 10 x 60 mm
Countersunk anchor with hexagonal bolt and pressed washer
Register now and access more than 125,000 products
Countersunk anchor with hexagonal bolt and pressed washer
The MFR multi-function frame anchor is designed for universal mounting of façade substructures and attachments made of wood and metal in many common substrates. Different anchor and screw geometries allow for a variety of different applications. Due to the special dowel construction, the MFR with a diameter of 10 mm can be inserted with a reduced setting depth of 50 mm or with the standard setting depth of 70 mm.
Application area:
For fastening façade constructions made of wood and metal, window and door frames, fire doors, gates, metal brackets, rails, consoles, hanging cabinets, panels, frames, square timbers on concrete, solid brick, solid sand-lime brick, solid brick made of lightweight concrete, aerated concrete, vertically perforated brick, hollow sand-lime brick, hollow block made of lightweight concrete, pre-stressed concrete hollow plates, etc.
Advantages:
- Approved for use in concrete, masonry, aerated concrete and reinforced aerated concrete*
- Available with a diameter of 8 mm, 10 mm or 14 mm
- Two setting depths for greater flexibility (dia. 10 mm)*
- Lengths 80–320 mm
- Patented quadruple expansion for a secure fit
- Immediate load-bearing capacity — no waiting
- Very versatile
- Extensive product range
- The anchor and screw are pre-assembled
- Fire protection R90 (see "Approval")
- Tested and approved by Hörmann for fire doors in solid construction materials*
- * Note the types and dimensions
Advice:
Drill into perforated stone and aerated concrete by turning only, no hammer action.
Datasheets(X)
 | |
Type description | MFR SB SSKS A4 |
Anchor diameter x anchor length (l) | 10 x 60 mm |
Attachment height (t fix 1) | 10 mm |
Nominal drill hole diameter | 10 mm |
Drill hole depth | 60 mm |
Drill hole depth (h 1) | 60 mm |
Embedding depth (h nom1) | 50 mm |
Internal drive | TX40 |
External drive | WS13 |
Through-hole in the component to be connected (d f) | 10.5 mm |
Material | PA 6 - Polyamide |
Material of screw | Stainless steel A4 |
Screw diameter (ds) | 7 mm |
Head diameter | 19 mm |
Anchor diameter | 10 mm |
Anchor length (l) | 60 mm |
Approval | ETA |
