Metal autoclaved aerated concrete anchor, zinc-plated steel
Metal aerated concrete anchor, galvanised steel, screw Ø 4.0–5.0 mm, 5 x 30 mm
Metal expansion anchor for fastening components in autoclaved aerated concrete and other substrates.
Register now and access more than 125,000 products
Metal expansion anchor for fastening components in autoclaved aerated concrete and other substrates.
Application area:
For securing
cable and pipe clamps, water conduits, gas pipes etc.
to
autoclaved aerated concrete, gypsum block panels, pumice, lightweight concrete, perforated and solid brick, sand-lime brick and concrete.
Advantages:
- Ribbed structure for safe screw guidance
- External teeth ensure high pull-out values
- The anchor fulfils technical regulations for gas pipes in line with the German Technical Regulations for Gas Installation (TRGI) 3.3.7.1 in combination with an 8 mm stair bolt (article no. 0232 98 ...).
Advice:
Can be hammered directly into low-strength autoclaved aerated concrete without pre-drilling for the dimensions 5x30, 6x32 and 8x38. Pre-drilling is required for all other dimensions and materials.
Datasheets(X)
Type description | MGD 5 |
Anchor diameter x anchor length (l) | 5 x 30 mm |
Min./max. drill hole diameter | 5-7 mm |
Drill hole depth | 35 mm |
Required wood screw diameter (d scr.wood) | 4 - 5 mm |
Anchor diameter | 5 mm |
Min. drill hole diameter | 5 mm |
Anchor length (l) | 30 mm |
Max. drill hole diameter | 7 mm |
Material | Steel |
Surface | Zinc plated |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
