Metal anchor, ZAMAK
Zamak metal anchor with steel-quality screw 8.8 10x80
Hexagon head metal anchor for high loads.
Art.-no.
0906010080
EAN 8003567510076
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Hexagon head metal anchor for high loads.
Fins and taper made of zamak 5 by injection. Pre-installed to the element to be fixed. Suitable for securing high loads.
- Screw: Steel class 6.8
- Capsule: zamak 5
- Washer: DIN 9021
- Coating: Zinc-plated ≥ 5 μm
Application area:
1.- Drill a hole.
2.- Clean the hole.
3.- Insert the bolt anchor through the element to be fixed and tap it into place.
4.- Tighten the anchor with the torque wrench to the indicated torque.
Advantages:
- Easy assembly.
- Time-saving.
- Increases safety at high loads.
- Available with or without screw.
Advice:
Due to the greater expansion capacity of the taper, this is recommended for use in both concrete and lower-strength base materials (bricks, hollow bricks, low-strength concrete etc.) that require a greater expansion capacity.
Drill diameter | 16 mm |
Product information
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
