Locking nut, DIN 7967 galvanised
Locking nut, DIN 7967, galvanised, 46 AF, M30
Register now and access more than 125,000 products
Advice:
Tightening the locking nut:
Screw in locking nut by hand and then tighten 1/4 to 1/2 of a turn using a wrench.
Releasing the locking nut:
Fully tighten hexagon nut to release the spring effect of the locking teeth. The locking nut can then be loosened easily.
Do not use the nut in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M30 |
Width across flats (s) | 46 mm |
Width across corners (e) | 50.85 mm |
DIN | 7967 |
Height (h) | 8 mm |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Nominal diameter | 30 mm |
Last viewed
Wall bracket
Twist drill bit, DIN 1897, solid carbide
Countersunk head chipboard screw, zinc plated, Pozidriv
ultra twist drill bit HSS-O
Hexagonal bolt DIN 933 8.8, galvanised
Hammerset anchor E, steel, galvanised
RECA x-twin ultra hammer drill bit
diaflex concrete SPECIAL RS10B 115-600 mm
RECAtherm adhesive tape, green, for stabil
arecal Rostex rust remover