KSK fully self-adhesive sealing film
KSK sealing film, self-adhesive, thickness 1.5 mm, 2 rolls of 20 m 150 mm x 20 m
Register now and access more than 125,000 products
The KSK sealing film is used for air-, wind- and watertight fixing to the structure for construction elements and in the façade area. The film is used specifically to seal the lower construction connection according to DIN 18195. It adheres excellently to surfaces that are commonly used in construction such as concrete, masonry, wood, metal, many plastics, hard PVC and various cold bitumen.
Advantages:
● Airtight, windproof and watertight
● Can be applied to slightly damp surfaces
● Offers maximum protection against indoor air pollution - certified according to GEV-EMICODE® EC1plus - very low emissions
● Slotted masking paper for precise application to surface
● Can be applied in temperatures from -5°C
● No additional adhesive required
Advice:
The surfaces must be capable of bearing loads and free of oils, greases, dust and dirt. Not suitable for sealing against pressurised water. Cannot be plastered or painted over.
Material thickness | 1.5 mm |
Roll width | 150 mm |
Length of roll | 20 m |
Min./max. temperature resistance | -30 to +70 °C |
Min./max. processing temperature | -5 to +35 °C |
Ultraviolet resistance | 3 months |
Shelf life from production | 12 Month |
Datasheets(X)
Last viewed
TT underlay pad made of rubber granules
S 80 High Tack construction adhesive
Countersunk head chipboard screw, zinc plated, Pozidriv
SZ-SK zinc-plated steel heavy-duty anchor
1/4 inch slotted SL bit
DIES FOR GIP 500
HSS-Co twist drill bit DIN 338
EXTREME HSS-Co8 hole saw
Machinist's hammer with ash handle DIN 1041
XTREME GRIP CHEMICAL ANCHOR
