Insulation anchor ID
ID 95 insulation anchor, polyethylene, hexagon socket 13, 95 mm
The specialist anchor for fixings in polystyrene and rigid foam panels
Register now and access more than 125,000 products
The specialist anchor for fixings in polystyrene and rigid foam panels
Field of Application:
For securing electrical installations, lighting, building signs, letter boxes, motion detectors etc. in polystyrene, rigid foam panels and other thermal insulation composite systems.
Advantages:
Can be used outdoors or in wet rooms in conjunction with stainless steel screws
No need for time-consuming stand-off installation in masonry
Prevents cold-bridging effect
Temperature-neutral -20°C to +100°C
Easy to use
Fast and low-cost mounting
For an insulation anchor length of 95 mm, the screw diameter of 8 mm can be reduced to a screw diameter of 4-5 mm using the RECA nylon anchor 0903 008 40 - universal application options
All packs include a setting tool
Advice:
Remove an area of plaster or other surface material from the base material corresponding to the size of the wall plug collar (see table). Screw the anchor in until flush using low torque without pre-drilling.
Maximum length of thread engagement of screw:
ID 50 = 40 mm
ID 95 = 70 mm
Datasheets(X)
Type description | ID 95 |
Drill hole diameter in plaster/cladding sheet metal (d) | 30 mm |
Anchor length (l) | 95 mm |
Required wood screw diameter (d scr.wood) | 8 mm |
Required bolt diameter (metric) | M8 |
Embedding depth | 95 mm |
Nominal drill diameter (d 0) - condition | Do not pre-drill |
Max. screw-in depth (d a) | 70 mm |
Max. temperature resistance | -20 °C |
Min. temperature resistance | 100 °C |
Material | PE - Polyethylene |
Colour | White |
Resistance against | Aging |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!