Hexagonal bolt with shank, DIN 931 8.8, galvanised
Hexagonal bolt with shank, DIN 931 8.8, galvanised, 27 AF, M18 x 100
Register now and access more than 125,000 products
Design:
With shaft
Advice:
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
 | |
Nominal diameter (d) | 18 mm |
Length (l) | 100 mm |
Thread length (metric thread) (b) | 42 mm |
Head height (k) | 11.5 mm |
Head diameter (e) | 30.14 mm |
Width across flats (s) | 27 mm |
DIN | 931 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Thread type | Metric thread |
Design | With shaft |
Thread type x nominal diameter | M18 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Cheese head screw, DIN 6912, 8.8, plain
ECON Kaiser flush-mounted windproof sockets
Hand tap, DIN 352, HSS taper tap
x-twin ultra hammer drill bit incl. trade packs
RILSAN TECHLINE TUBING
Hammer tacker Rapid R 311 (type 140)
SEAT COVERS VOLVO FH/FM 12 POST-2008 ELITE
3/4 inch IMPACT ACCESSORIES SCARTOOLS
