Hammerset anchor E, steel, galvanised
Hammerset anchor E steel, zinc-plated, M 5x25
For non-cracked concrete and for attaching multiple non-load-bearing systems to cracked concrete
Register now and access more than 125,000 products
For non-cracked concrete and for attaching multiple non-load-bearing systems to cracked concrete
The hammerset anchor E is a drop-in anchor for anchoring in concrete.
The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again.
No need for installation torque.
Application area:
Suspended items in heating, sanitation and ventilation, anchoring with threaded rods and bolts, flat steel and profiled steel.
Advice:
Fire protection tested in concrete C20/25 to C50/60.
Advantages:
- Approved for multiple attachment in cracked and non-cracked concrete
- Approved for multiple attachment in hollow pre-stressed concrete plate ceilings
- Approved for use as a single anchor for fixing in non-cracked concrete (anchoring depth ≥ 30 mm)
- Low drilling depth means a low risk of hitting reinforcements (anchoring depth 25 mm)
- Stop bit and SDS plus mechanical setting tool ensure fast, efficient and labour-saving assembly
- The marker setting tool makes visual installation checks easy
- Standard metric screws and threaded rods enable a wide range of applications
- FM approval for use in the installation of sprinkler systems (M10–M20)
- Suitable for use in the installation of sprinkler systems in accordance with the requirements of VdS Schadenverhütung GmbH (M8–M16)
- Fire-protection tested in concrete C20/25 to C50/60
Datasheets(X)
Type description | E M5 |
Anchor diameter x anchor length (l) | 5 x 25 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Drill hole depth (h 0) | 25 mm |
Minimum component thickness (h min) | 100 mm |
Anchor length (l) | 25 mm |
Effective anchoring depth (h ef) | 25 mm |
Material | Steel |
Surface | Zinc plated |
Anchor diameter | 5 mm |
Min. edge clearance (c min) | 95 mm |
Min. centre-to-centre distance (s min) | 60 mm |
Through-hole in the component to be connected (d f) | 6 mm |
Torque during anchoring (T inst) | 3 Nm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Countersunk head chipboard screw, zinc plated, Pozidriv
Washer, DIN 125 140 HV A2
Replacement tube for polyurethane foam RECA S 27
SZ-SK heavy-duty anchor, zinc-plated steel
Flex-Mop flap discs, curved
V-A anchor rods
RECA arecal Long Lub high-pressure adhesive lubricant
EVO twist drill bit, DIN 338 HSS
ROTARY WHEELS
Machine tap for steel, reduced shaft, through hole DIN 376