Hammerset anchor E, A4
Hammerset anchor E stainless steel, A4 M 6x30
For non-cracked concrete and for the multiple attachment of non-load-bearing systems to concrete
Register now and access more than 125,000 products
For non-cracked concrete and for the multiple attachment of non-load-bearing systems to concrete
The E A4 hammerset anchor is an A4 stainless steel drop-in anchor for pre-mounting that is flush-mounted in concrete surfaces. The anchor is used to drive in the deformation-controlled cone. This expands the anchor to embed it securely in concrete with different compression strengths. The installed component can be removed and remounted without affecting load capacity.
Application area:
For securing
Threaded rods, cable conduits, pipelines, mounting rails, ventilation ducts, suspended ceilings, sprinkler systems, metal structures, grilles, formwork supports etc.
on standard concrete with a strength class ≥ C20/25 and ≤ C50/60, also for use outdoors or in wet rooms if conditions are not particularly aggressive.
Advantages:
- Small drill hole depth, high load-bearing capacity
- Two-stage expansion cone for reduced centre-to-centre distances and edge distances
- Easy installation with minimal driving effort even in high-strength building materials or when using worn drills
- Immediate load-bearing capacity - no waiting
- Fixings can be removed from the flush-mounted anchor
- No load testing required (see ETA approvals)
Advice:
- It is essential to observe drill hole depth and drill hole diameter
- Drive the cone in using the expander tool until the setting tool makes contact with the wall plug body
- Minimum screw length = component thickness + minimum screw-in depth
- Maximum screw length = component thickness + thread depth
Datasheets(X)
Type description | E A4 M6 |
Anchor diameter x anchor length (l) | 6 x 30 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Anchor length (l) | 30 mm |
Material | Stainless steel A4 |
Anchor diameter | 6 mm |
Min. edge clearance (c min) | 80 mm |
Min. centre-to-centre distance (s min) | 50 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!