Fixanchor BZ plus A4
BZ plus stud anchor, A4, M20 x 60/195
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete
Register now and access more than 125,000 products
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete
The BZ plus A4 stud anchor is a torque-controlled anchor for quick in-place installation. When the hexagon nut is tightened, the stud is pulled into the expansion clip and clamps it effectively against the drill hole wall. The special coating on the hexagon nut effectively prevents cold welding
to the bolt thread.
Application area:
For anchoring medium to heavy loads in cracked and uncracked concrete: Supports, steel beams, railing fastenings, cable conduits, pipe conduits, timber constructions, brackets, stadium seating, fastenings in earthquake regions and similar
Load range: 2.4 kN-43.9 kN
Concrete grade: C20/25-C50/60
Advantages:
- High permissible loads, low spacing and edge distance
- NEW: BZ plus A4 70M12 with 33 % higher permissible tensile loads - for details, see European Technical Approval ETA-99/0010
- Quick and easy in-place installation
- Immediate load-bearing capacity - no waiting
- The special coating on the nut effectively prevents cold welding between nut and bolt thread.
- The plastic-covered cone guarantees subsequent expansion if cracks form in the concrete.
- Two effective anchorage depths for greater flexibility
 | |
Type description | BZ 20, 60/195 A4 |
Anchor diameter x anchor length (l) | 20 x 195 mm |
Max. attachment height (t fix) | 60 mm |
Nominal drill-bit diameter (d 0) | 20 mm |
Drill hole depth (h 1) | 125 mm |
Embedding depth (h nom) | 114 mm |
Effective anchoring depth (h ef) | 100 mm |
Thread diameter x thread length (metric thread) | 20 x 70 mm |
Width across flats | 30 mm |
Torque during anchoring (T inst) | 200 Nm |
Minimum component thickness (h min) | 200 mm |
Through-hole in the component to be connected (d f) | 22 mm |
Material | Stainless steel A4 |
Surface of the nut | Dark slide coating |
Anchor diameter | 20 mm |
Anchor length (l) | 195 mm |
Thread diameter | 20 mm |
Thread length (metric thread) | 70 mm |
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hand protection for universal chisel
Bit holder 1/4", E 6.3
DISC Compact Fast hook-and-loop discs
HSS-Co twist drill bit DIN 1897
HSS DIN 338 twist drill bit
speed-tron SDS-Plus hammer drill bit
x-tron ultra SDS-Max 4-cutter hammer drill bit
EXTREME HSS-Co8 hole saw
Hexagonal bolt DIN 933 8.8, galvanised
