Fixanchor BZ plus A4
BZ plus stud anchor A4 M16 x 5-25/125
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete
Register now and access more than 125,000 products
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete
The BZ plus A4 stud anchor is a torque-controlled anchor for quick in-place installation. When the hexagon nut is tightened, the stud is pulled into the expansion clip and clamps it effectively against the drill hole wall. The special coating on the hexagon nut effectively prevents cold welding
to the bolt thread.
Application area:
For anchoring medium to heavy loads in cracked and uncracked concrete: Supports, steel beams, railing fastenings, cable conduits, pipe conduits, timber constructions, brackets, stadium seating, fastenings in earthquake regions and similar
Load range: 2.4 kN-43.9 kN
Concrete grade: C20/25-C50/60
Advantages:
- High permissible loads, low spacing and edge distance
- NEW: BZ plus A4 70M12 with 33 % higher permissible tensile loads - for details, see European Technical Approval ETA-99/0010
- Quick and easy in-place installation
- Immediate load-bearing capacity - no waiting
- The special coating on the nut effectively prevents cold welding between nut and bolt thread.
- The plastic-covered cone guarantees subsequent expansion if cracks form in the concrete.
- Two effective anchorage depths for greater flexibility
Datasheets(X)
 | |
Type description | BZ 16-5-25/125 A4 |
Anchor diameter x anchor length (l) | 16 x 125 mm |
Max. attachment height (t fix) | 5 mm |
Max. attachment height reduced (t fix, red) | 25 mm |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 1) | 110 mm |
Drill hole depth reduced (h 1, red) | 90 mm |
Embedding depth (h nom) | 77 mm |
Embedding depth (h nom,red) | 97 mm |
Effective anchoring depth (h ef) | 85 mm |
Effective anchoring depth reduced (h ef, red) | 65 mm |
Thread diameter x thread length (metric thread) | 16 x 46 mm |
Width across flats | 24 mm |
Torque during anchoring (T inst) | 110 Nm |
Minimum component thickness (h min) | 140 mm |
Minimum component thickness for reduced anchoring depth (h min) | 140 mm |
Through-hole in the component to be connected (d f) | 18 mm |
Material | Stainless steel A4 |
Surface of the nut | Dark slide coating |
Anchor diameter | 16 mm |
Anchor length (l) | 125 mm |
Thread diameter | 16 mm |
Thread length (metric thread) | 46 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
HSS DIN 338 twist drill bit
RUSPERT® zinc-plated TT levelling foot
ultra screwdriver sets
uni3 BG1 multi-purpose tape
arecal Long Lub high-pressure adhesive lubricant
x-tron ultra SDS-Max 4-cutter hammer drill bit
arecal OEL CLEAN workshop cleaner
GRILLE FOOTSTEP LOWER
External lenses
RECA arecal Ultra multi-purpose oil