Fixanchor BZ plus A4
BZ plus stud anchor A4 M12 x 15-35/110
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete
Register now and access more than 125,000 products
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete
The BZ plus A4 stud anchor is a torque-controlled anchor for quick in-place installation. When the hexagon nut is tightened, the stud is pulled into the expansion clip and clamps it effectively against the drill hole wall. The special coating on the hexagon nut effectively prevents cold welding
to the bolt thread.
Application area:
For anchoring medium to heavy loads in cracked and uncracked concrete: Supports, steel beams, railing fastenings, cable conduits, pipe conduits, timber constructions, brackets, stadium seating, fastenings in earthquake regions and similar
Load range: 2.4 kN-43.9 kN
Concrete grade: C20/25-C50/60
Advantages:
- High permissible loads, low spacing and edge distance
- NEW: BZ plus A4 70M12 with 33 % higher permissible tensile loads - for details, see European Technical Approval ETA-99/0010
- Quick and easy in-place installation
- Immediate load-bearing capacity - no waiting
- The special coating on the nut effectively prevents cold welding between nut and bolt thread.
- The plastic-covered cone guarantees subsequent expansion if cracks form in the concrete.
- Two effective anchorage depths for greater flexibility
 | |
Type description | BZ 12-15-35/110 A4 |
Anchor diameter x anchor length (l) | 12 x 110 mm |
Max. attachment height (t fix) | 15 mm |
Max. attachment height reduced (t fix, red) | 35 mm |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 1) | 90 mm |
Drill hole depth reduced (h 1, red) | 70 mm |
Embedding depth (h nom) | 80 mm |
Embedding depth (h nom,red) | 60 mm |
Effective anchoring depth (h ef) | 70 mm |
Effective anchoring depth reduced (h ef, red) | 50 mm |
Thread diameter x thread length (metric thread) | 12 x 51 mm |
Width across flats | 19 mm |
Torque during anchoring (T inst) | 50 Nm |
Minimum component thickness (h min) | 120 mm |
Minimum component thickness for reduced anchoring depth (h min) | 100 mm |
Through-hole in the component to be connected (d f) | 14 mm |
Material | Stainless steel A4 |
Surface of the nut | Dark slide coating |
Anchor diameter | 12 mm |
Anchor length (l) | 110 mm |
Thread diameter | 12 mm |
Thread length (metric thread) | 51 mm |
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Insect repellent wipes
PNEUMATIC PUMP FOR MEDIUM/HIGH VISCOSITY OIL TRANSFER
Wall bracket
Roofing screw with sealing washer, dia. 20 mm, A2, TX
SEAT COVERS RENAULT PREMIUM ROUTE POST-2005
1/4 inch PH recess torsion bit
KSK fully self-adhesive sealing film
HSS-Co twist drill bit DIN 1897
HSS morse taper twist drill bit DIN 345
Hexagon nut DIN 934 strength class 8, zinc plated
