EXTRACTORS ASSORTMENT
BROKEN SCREW EXTRACTOR SET
FOR SCREWS AND STUDS FROM M6 TO M12
Art.-no.
S690140000
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
FOR SCREWS AND STUDS FROM M6 TO M12
Contents: bit guides A-K drill bits 3.2-4.8-6.4-8.0-8.7
Instructions:
1 Drill a small hole in the broken stud bolt. Depending on the breaking point, use the appropriate guide to centre the drill bit.
2 Enlarge the hole to a smaller diameter than the suitable extractor.
3 Push the extractor in.
4 Apply the special nut at the bottom of the extractor and use a wrench on the nut to extract the broken screw.
Product information
Datasheets(X)
Last viewed
Self-adjusting crimping tool 190 mm for wire end ferrules, front insertion
Lube Shuttle grease cartridge with graphite
Sanilevel spirit level
Countersunk head chipboard screw, zinc plated, Pozidriv
CA preparation unit 1/4 inch die-cast zinc/brass
Application gun for 50-ml two-component adhesive
Colosseum shoes S1P SRC
Wall brackets from the ZS 41 toothed mounting rail system
SUN VISOR ACTROS MP3 WITH MOUNTING BRACKETS