Drywall screws, double-start thread, TMN, collated
Drywall screw EN 14566, class 48, TMN collated, needle tip, 3.9 x 35
EN 14566 phosphated, class 48
Register now and access more than 125,000 products
EN 14566 phosphated, class 48
Suitable for Bosch, DeWalt, Duraspin, Fein, Helfer, Hilti model SMD 57, Hitachi, Kanematsu, Makita, Milwaukee, Rocker, Senco, Spit, Superdrive and Tyrex systems.
Application area:
Double-start thread drywall screws are used for mounting plasterboard onto substructures consisting of sheet steel profiles up to a thickness of 0.6 mm.
Field of Application:
For mounting plasterboard onto metal supports ≤ 0.7 mm thick. The bugle head can be sunk into the board until flush; good contact pressure is achieved.
Design:
Taped
Content remark:
Pack contents: 1000 pieces; 20 strips, each with 50 screws
Advice:
Material class A1, i.e. drywall screws are non-flammable.
Pull-out resistance 450 N on metal profiles in accordance with EN 14195 (0.60 ± 0.04 mm) or wood in accordance with EN 338, class C 16.
 | |
Nominal diameter (d) | 3.9 mm |
Nominal diameter x length | 3.9 x 35 mm |
Length (l) | 35 mm |
Thread form | Double start thread |
Head diameter (dk) | 8.5 mm |
Head type | Bugle head |
Internal drive | H2 |
Material | Steel, case-hardened |
Surface | Phosphated |
Design | Taped |
Content remark | Pack contents: 1000 pieces; 20 strips, each with 50 screws |
EN standard | 14566 |
Material of belt | Plastic |
Number of screws per belt | 50 PCS |
Datasheets(X)
