Double-sided wood connector, DIN 1052, zinc plated
Two-sided push-in dowels, can be used in acc. with DIN 1052, galv. steel, 62 mm
Register now and access more than 125,000 products
The double-sided wood connectors are fixed with bolts which pass through the wood, the tooth plate connector and then through the wood that is being connected. After the hole has been drilled into the wood, the tooth plate connector is pressed into the wood. If necessary, use a hydraulic press-in tool.
Approval
The double-sided tooth plate connectors from BB Stanz- und Umformtechnik are subject to the harmonised standard DIN EN 14545
Design:
Double-sided
Advice:
Steel quality
- S 250 GD + Z275
- Yield strength ReH ≥ 250 N/mm²
- Tensile strength Rm ≥ 320 N/mm²
- Breaking elongation A80 ≥ 19 %
- Corrosion protection of 275 g/m² on both sides - corresponds to a zinc layer thickness of approx. 20 μm
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
Internal diameter | 21 mm |
Outer diameter | 62 mm |
DIN | 1052 |
Surface | Zinc plated |
Design | Double-sided |
Material | Steel |
Last viewed
ACTIVATED CARBON FILTERS
EXTREME HSS-Co8 hole saw
CABLE TENSIONING CLAMPS
SDS-max point chisel
Recaseal uni window sealing film, self-adhesive strips
Metric Y-shaped plastic/metal automatic fitting
Extreme twist drill bit
Boxx 238 plastic system case
Thread pitch gauge for metric and Whitworth threads
RECA MULTI screwdriver sets