For detailed information, other images and documents, please select individual articles from the following table.
Available in 1 version
Prices for customers after login
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
The Scar multifunction generator with INVERTER technology enables two-touch and four-touch continuous wire (MIG) welding, lift start TIG welding and electrode welding. The new Scar machine is extremely compact, reliable, lightweight and incorporates a 5 kg wire reel spool. The Scar multifunction generator has a user-friendly interface, with a range of collaborative programs to facilitate MIG welding for the operator.
Advantages:
Supply voltage: 230/240 V
Phases: 1
Frequency: 50/60 Hz
Actual current: (25 %) 16.0 A
Actual power: (25 %) 3.6 kVA
Form factor: 0.7
Efficiency: 81 %
Idle voltage: 71 V
Degree of protection: IP 23 S
Insulation class: H
Weight: 16 kg
Working temperature: 40°C
Current range: 20-180 A
Welding current: 35 % (25°C) 180 A
Welding current: 100 % (25°C) 110 A
Welding current: 25 % (40°C) 180 A
Welding current: 60 % (40°C) 120 A
Welding current: 100 % (40°C) 100 A
Cable/earth: 16 mm²
Wire feed rollers: 2
Length x Width x Height: 495x225x355
Instructions:
The machine can weld most types of electrodes on the market with a diameter of up to 3.25
-RUTILE 6013
-BASIC 7018
-STAINLESS STEEL 316
-CAST IRON
The machine can be used to TIG weld any type of carbon steel and stainless steel from 0.8 to 4 mm thick.
Advice:
Electrode mode materials: Carbon steel, stainless steel
TIG mode materials: Carbon steel, stainless steel
Wire MIG mode materials: Carbon steel, stainless steel, iron, aluminium, galvanised sheet metal
INCLUDED: 1 pressure reducer
1 electrode clamp with cable
1 earth wire
1 TMS 15 MIG torch
AVAILABLE ON REQUEST:
For aluminium welding:
Aluminium welding set: art. 705002.341
2 kg reel of wire for aluminium welding: art. 982008.016
For TIG welding:
TTSE 17 4M TIG torch with Euro connection: art. 705002.342
For gasless wire welding:
Spool for gasless flux-cored wire: art. 705002.343
Flux-cored wire 0.9 for gasless welding: art. 982008.017
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!