For detailed information, other images and documents, please select individual articles from the following table.
SCAR FAP/DPF RINSE
RINSING FLUID FOR TREATING FAP/DPF PARTICULATE FILTERS
Available in 1 version
Prices for customers after login
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
RINSING FLUID FOR TREATING FAP/DPF PARTICULATE FILTERS
Scar FAP/DPF Rinse completes the particulate filter cleaning treatment.
Designed to be applied specifically following application of Scar FAP/DPF Cleaner.
A liquid cleaning agent that completely removes soot and carbon residues that have previously been dislodged by the cleaning fluid.
Advantages:
NO NEED TO DISASSEMBLE FILTERS FOR CLEANING
GOOD VALUE FOR MONEY AS IT RESTORES THE FILTER, THUS AVOIDING MORE EXPENSIVE REPLACEMENT
LEAVES NO RESIDUE AND DOES NOT DAMAGE METALS
Instructions:
The treatment is carried out by applying the cleaning product in succession (art. 890500005 Scar FAP/DPF Cleaner) and rinsing the product (art. 890500006 Scar FAP/DPF Rinse) when the engine and exhaust are cold:
Using the appropriate Scar spray gun (art. 890400202), apply the product by spraying it upstream of the particulate filter in the direction of the outlet of the exhaust system and continue until the foam can no longer be seen escaping, indicating that the FAP has been cleaned.
Leave to work for 30/40 minutes. Once 30/40 minutes have elapsed after applying the cleaner, apply the rinsing product by spraying it upstream of the particulate filter, still using the appropriate spray gun, until the foam can no longer be seen escaping. Leave to work for 4/5 minutes.
Then start the engine and let it idle for at least 20 minutes.
Lastly, test a filter regeneration cycle on the road by revving the engine slightly.
* The probe can be introduced into the exhaust system via the pressure sensor before the particulate filter by disconnecting the flow pipe or by loosening the attachment flanges upstream of the particulate filter by a few millimetres.
Treatment should not be carried out if the filter is damaged mechanically
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!